1. Product characteristics
JY-308 is our new single component silicone oil emulsion for polyester steple fiber, JY-308 contains many of the faculties groups, it can make the polyester fiber excellent fluffy, rebound resilience, smooth, soft, good handling feeling and high anti-static characteristics, the hollow fiber will be more white and bright after using the finishing agent.
2. Technical index
Appearance: milky white liquid
Solid content (%): 58-60
Ionic character: non-ionic
3. Working liquid component:
Dilute JY-308 silicone oil emulsion with water:
Suggested working liquid concentration ratio
(original products: water) 1：8 ~ 20
Oiling rate % 0.3- 0.6
4. Working liquid compounding method
1) according to the concentration and the proportion of the total amount of the expected liquid, calculate the weight of JY-308 and water,
2) pouring the needed amount of water into the kettle and start mixing, then pouring the weighted JY-308 and stir them about 15 minutes to dispersed evenly,
3) stopping mixing and storing the working liquid in storage tank for using,
4) heating is not needed during the working liquid preparation, room temperature water is advisable,
5) preparated liquid should be used during 12 to 24 hours.
5. Oiling way
The finishing agent using the spray or the combination of dipping and spraying oiling method, either of them can achieve satisfactory finishing effectation.
6. Fiber heating setting process requirement
Oiled curly tow, short fibers must to be done heating setting processing. Suggesting temperature 150 ℃ ~ 170 ℃, retention time 10 min ~ 15 min, of course, concrete process parameters determined by fiber manufacturers.
7. Product security,
no bad reaction to human skin in using procession, but please wash with a lot of clean water if it splash into eyes.
8. Packaging and shipping quality
25kg or 200kg clean airtight plastic packaging, stored in a ventilated shady and cool place, under temperature 0 ~ 35 ℃, shelf life half a year, according to the non-dangerous goods shipment.