Type | Item no | Appearance | Active Content | Diluting Solvent | Application | Recommended Concentration | Dosage |
Silicone waterproof agent (Solvent based) | JY-8118 | Transparent liquid | ≥98% | Isopropanol, ethyl alcohol, low boiling white oil | Bridge, harbor, concrete road | 20~40%or 100% | 150~200 ml/m2 |
JY-8128 | Transparent liquid | ≥98% | Isopropanol, ethyl alcohol, low boiling white oil | Bridge, harbor, concrete road | 100% | 150~200 ml/m2 | |
JY-8158 | Transparentor slightly turbid liquid | ≥98% | Isopropanol, aromatic hydrocarbon | Limestone, marble, sandstone, granite,natural stone | 5~20% | 250~400 ml/m2 | |
JY-8168 | Transparentor lightyellow liquid | ≥98% | Isopropanol, aromatic hydrocarbon | natural porous stone, concrete, brick, interior and exterior wallcoating | 5~10% | 250~400 ml/m2 | |
JY-8188 | Transparent or light brownliquid | ≥98% | Isopropanol,ethyl alcohol, low boiling white oil | natural porous stone, concrete, brick, outside wall of buildings | 5~10% | 250~400 ml/m2 | |
|
|
|
|
|
|
|
|
Silicone waterproof agent (Water based) | JY-8218 | Milky white liquid | 40~50% | Water | Interior and exterior wallcoating, porous stone, concrete | 5~15% | 150~400 ml/m2 |
JY-8228 | Milky white liquid | 40% | Water | Old and new concrete, Neutral substrate (red brick), Inorganic building exterior wall | 5~15% | 250~400 ml/m2 | |
JY-8258 | Milky white liquid | 40~50% | Water | Rock wool, mineral wool, glass wool, expanded perlite | 100~300 ml/m2 | ||
JY-8288 | Milky white liquid | 40% | Water | Concrete, mortar, plaster,cement paste, Fiber reinforcedcement board, precast concrete component, red brick, ceramicboar, low density stone | 5~10% | 250~400 ml/m2 | |
JY-8298 | Milky white liquid | 50% | Water | Fresh cement, mortar mixture,primer before coating | 5~10% | 250~300 ml/m2 | |
JY-8518 | Milky white liquid | 20~50% | Water | Exterior masonry substrates, concrete block, brick, poured concrete, precast concrete, exterior insulation finish systems (EIFS), and coated masonry substrates. |
| Coatingtwice to achieve the required 0.25mm dry film thickness | |
JY-8558 | Milky white liquid | 60% | Water | cement surface, concrete, stonewall, cement fibrolite plate | 100% | 0.1~0.2 kg/m2 | |
|
|
|
|
|
|
|
|
Powder | JY-8360 | White powder | 100% |
| Hydrophobic additive for dry mix formulation (render, grouts), providing obvious reduction of water penetration |
| 0.1~3% |