1. Product Description
JY-1213 is a silicone surfactant/low foam pesticide additive. Compared with traditional adjuvants, it can reduce the surface tension of the spray solution more effectively. The contact angle of spray solution on leaf surfaces is reduced, which increases the spread range of spray.
2. Product Feature
1. Enhance the agro-chemical's penetrability, dispersity, absorption, transportation on the plant.
2. Increase the spreading area and speed of the agro-chemicals on the leaf of plant especially waxy surface.
3. Reduce foam during use.
4. Promotes rapid uptake of agrochemicals (rainfastness).
5. Non-toxic, environmental friendly adjuvant.
3. Typical Properties
Appearance: Transparent liquid or light amber liquid
Surface tension (0.1%Wt, mN/m): 20.5-21.5
Viscosity (25℃, mm²/s): 25-35
Active content (%): ≥95
4. Usage and Dosage (Same as Silwet 806)
Spraying mixture in drum (Tank mixture)
In general, add JY-1213 (4000 times) 5g in every 20kg spraying solution. If it needs to promote the adsorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly.
When using, first dissolve the pesticide, add JY-1213 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using the adjuvant. the water amount reduced to 1 /2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.
5. Application
Biological pesticide spray mixture liquid such as pesticide, bactericide, herbicide, foliar fertilizer, plant growth regulator, etc.
6. Package and Storage
1. This product is available in 25L, 200L and IBC drums.
2. This product should be stored in room temperature, avoid direct sunlight.
When stored in the original unopened containers, this product has a usable life of 24 months from the date of production.
3. This product is according to non-dangerous goods transportation.